Vulcan-Hart VCE6H ML-126177, VCE10H ML-126178, VCE10F ML-126179, VCE20H ML-126172, VCE20F ML-126173 Convection Oven User Manual


 
20
COMBI (Convection Baking with Steaming)
Combi baking / steaming is used for baking, roasting, or braising when steam needs to be added to the
oven during a convection baking operation. The 'Steam Factor' can be varied by repeat pressing of
the Combi key see Steam Factor in the table below. It is recommended that you preheat the oven.
Automatic Combi baking / steaming can be set up so the buzzer sounds when the Cooking Time has
elapsed or when the product's internal temperature has reached the Probe Temperature set point. If
using the Probe Temperature, insert the probe near the center of the product. Cooking Time is not used
when the Probe Temperature is in use.
Usually, the Cooking Time and Oven Temperature are used to control the Combi baking / steaming
process. Alternatively, the Probe Temperature can be used to indicate when cooking is done. When
using the Probe Temperature, either the Oven Temperature or can be used to control the oven.
Turn the oven ON.
Select Combi Mode and set the Steam Factor (see table below).
*
For
standard automatic
Combi baking with steaming, set the Oven
Temperature and the Cooking Time.
To set the Cooking Time, press
and use the UP and DOWN
arrows.
To set the Oven Temperature, press
and use the UP and DOWN
arrows to adjust the setting.
For
final probe temperature
Combi baking with steaming, set the Probe
Temperature.
To set the Probe Temperature, press
and use the UP and DOWN
arrows. When the Probe Temperature indicator is lit, the numeric
value in the time display is the Probe Temperature in °F. Probe
Temperature can be used with either
or .
When the control is set, load the oven. If using the probe, place it in the
center of the product. Close the door and press
to begin.
Upon completion of the Combi baking with steaming process, when either
the Cooking Time has counted down or the Probe Temperature has been
reached, the buzzer will sound.
Press
to silence the buzzer. Check the product for doneness.
* When selecting Steam Factor, press 1 to 6 times to obtain the desired steaming.
Indicator Lights Combi Key Steam Factor
❍●●●●● Press one time. 5
❍❍●●●●
Press two times. 10
❍❍❍●●● Press three times. 20
❍❍❍❍●● Press four times. 30
❍❍❍❍❍● Press five times. 40
❍❍❍❍❍❍ Press six times. 50
170
325
F
135