Filter
Top Products
– 6 –
ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH APPLICABLE
PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: DISCONNECT THE ELECTRICAL POWER SUPPLY FROM THE OVEN AND
FOLLOW LOCKOUT / TAGOUT PROCEDURES.
The wiring diagram is located on the inside surface of the right side panel as you face the oven. Use
copper wire rated for at least 90°C for the connection.
NOTE: Only single-phase fan motors are used on these ovens so there is no need to check direction
of motor rotation. The fan will rotate in the proper direction.
VENT HOOD
Some local codes may require the Combi oven to be located under an exhaust hood. Information on
the construction and installation of ventilating hoods may be obtained from
Vapor Removal from
Cooking Equipment
, NFPA standard No. 96 (latest edition).
BEFORE FIRST USE
Before using the oven for the first time, it must be "burned in" to release any odors that might result from
heating the new surfaces in the oven. Operate the oven at 480°F for 45 minutes in Convection H
OT
AIR Mode. Depending on which control is furnished, perform CONFIGURATION MODE —
PROGRAMMABLE CONTROL on pages 36 – 37 or CONFIGURATION MODE — MANUAL CONTROL
on pages 38 – 39.
ATADLACIRTCELE
ledoMhP/zH/stloV
EZISTIUCRICHCNARB
NOITCETORPDNANOITCETORPDNA
NOITCETORPDNA
NOITCETORPDNANOITCETORPDNA
yticapmAtiucriCmuminiM
eciveDevitcetorPmumixaMeciveDevitcetorPmumixaM
eciveDevitcetorPmumixaM
eciveDevitcetorPmumixaMeciveDevitcetorPmumixaM
SPMASPMA
SPMA
SPMASPMA
H6ECV
3/06/802
3/06/042
3/06/084
53
03
51
H01ECV
F01ECV
3/06/802
3/06/042
3/06/084
07
06
03
H02ECV
3/06/802
3/06/042
3/06/084
09
08
04
F02ECV
3/06/802
3/06/042
3/06/084
521
011
06
.noitidetsetal,07APFN/ISNA,edoClacirtcelElanoitaNehthtiwecnadroccanidelipmoC