Filter
Top Products
Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it, and level it.
Cleaning your refrigerator
Removing packaging materials
NOTE: Do not remove any permanent
Remove tape and any inside labels (except
instruction labels inside your refrigerator.
the model and serial number label) before
Do not remove the Tech Sheet fastened
using the refrigerator.
under the refrigerator at the front.
To remove any remaining tape or
label glue:
Cleaning it before use
l Rub briskly with thumb.
After removing all packaging materials, clean
your refrigerator before using
OR
it, if necessary. See cleaning
l Apply liquid hand-dishwashing detergent to
instructions on page 23.
area before removing glue as described
above. Do not use sharp instruments,
rubbing alcohol, flammable fluids, or
abrasive cleaners. These can damage the
material. See “Important Safety Instruc-
tions” on page 3.
Leveling it
Your refrigeratorhas 2 front leveling screws
-
one on the right and one on the left. To
adjust one or both of these, follow the
directions below.
1. Remove base grille. (See page 20.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counter-
clockwise.
4. Check with level.
5. Replace base grille. (See page 20.)
5