Filter
Top Products
Page 3-25
3-25
Cooking Products Service Manual
Original July, 1996 4321891
© 1996 Whirlpool Corporation
REMOVING THE OVEN TEMPERATURE SENSOR
4. Disconnect the wire harness from the old
oven temperature sensor and remove the
sensor from the range.
5. Mount the new oven temperature sensor to
the range and connect the wire harness.
6. Reassemble the range.
MOUNTING
SCREWS
OVEN TEMPERATURE
SENSOR
REAR PANEL
OF OVEN
2-WIRE
SENSOR
CONNECTOR
2-WIRE
HARNESS
CONNECTOR
OVEN
TEMPERATURE
SENSOR
LOWER ACCESS
COVER
3. From behind the range, remove the lower
access cover.
WARNING
CAUTION: When you work on the gas range, be
careful when handling the sheet metal parts. Sharp
edges may be present, and you can cut yourself if
you are not careful.
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electri-
cal shock.
1. Pull the range away from the wall so that you
can access the back.
2. Turn off the gas to the range and disconnect
the power cord from the wall outlet.