Filter
Top Products
The electronic oven control
Cancel
button
Display
lime/Tamp
Set Knob
BAKE
ON/OFF CLOCK
Timtw
Clock
Bake
stop
Cl&l
Broil
Bake
on/off button
lima time
button button temp
button
button
button
button
Display/clock
l
When you first plug in the range, the display
will flash until you set a new time. If after you
set the clock (page 12) the display again
flashes, your electricity has been off. Reset the
clock.
Command buttons
The command buttons tell the oven what to do
and in what order. A few examples:
-Clock tells the oven you are going to set the
clock.
-Cancel tells the oven to turn off.
9 When you are not using the oven, this is an
accurate clock.
l
When using the oven or Timer, the display
will show the time, temperature settings and
what command buttons have been pushed.
l
When showing the time of day, the display
will show the hour and minutes.
l
When using the Timer, the display will show
hours, minutes and seconds in the following
sequence:
- For settings from O-l minute 55 seconds,
the display will increase in 5-second incre-
ments and count down each second.
- For settings from 2-10 minutes, the display
will increase in 1 O-second increments and
count down each second.
- For settings from 10-60 minutes, the
display will increase in 1 -minute increments
and count down each second.
-For settings from 1 hour-9 hours 50
minutes, the display will increase in 5-minute
increments and count down each minute.
l
When using Bake Time and/or Stop Time,
the display will show hours and minutes.
Each command button (except Cancel) has its
own light. The light comes on when you push the
command buttons.
Timehemp set knob
Once you’ve pushed a command button to tell
the oven what you want it to do, you’ll use the
Time/Temp Set Knob to set a temperature or
time. Turning the TimeITemp Set Knob clockwise
increases the number on the display. Turning the
Time/Temp Set Knob counterclockwise de-
creases the number on the display.
11