Filter
Top Products
24.
25.
NIGHT LIGHT.
Touch this pad to turn on
the cooktop/countertop night light. See
page 15 for more information.
OFF.
Touch this pad to turn off the
x&top/countertop light. See page 16
for more information.
Audible signals
Audible signals are available to guide you
when setting and using your oven:
l
A programmlng tone will sound
each
time you touch a pad.
l
One long tone
signals the end of a Minute
Timer countdown.
l
Four tones
signal the end of a cooking
cycle.
l
Two tones
sound once every minute after
an End-of-Cooking signal as a reminder if
food has not been removed from oven.
l
Three
tones
sound if you have made an
incorrect entry.
To disable audible signals:
l
Touch and hold
Number Pad 1 for 4
seconds to disable programming tones.
OR
l
Touch and hold
Number Pad 2 for 4
seconds to disable all signals.
To turn signals back on:
Repeat steps under ‘To disable audible
signals” above.
NOTE:
Three tones, followed by two tones,
will sound when audible signals are turned
on or off.
Interrupting cooking
You can stop the oven during a cycle by
opening the door. The oven stops heating
and the fan stops, but the light stays on.
To
restart
cooking, close
the door and
If you do not want to continue cooking:
l
Close the door and the light goes off.
OR
Using the demonstration
feature
You can set your microwave oven to
demonstrate its functions without turning the
oven on.
NOTE:
This feature can only be used when
the microwave oven is first connected to
power. You cannot use the demonstration
feature after a Command Pad has been
touched.
To set the demo feature:
1. Open
the door and
keep il
open.
2. Touch and hold
AUTO START for four
seconds. Three tones, followed by two
tones, will sound.
3.
Release
AUTO START.
4. Shut
the door to start the demo.
To cancel the demo feature:
Touch OFF/CANCEL.
13