Filter
Top Products
PROBLEM
POSSIBLE CAUSE
SOLUTION
Microwave
The electric supply to your
Your electric company can tell you if
:ooklng times
home or wall outlets is low or
the line voltage is low. Your electrician
seem too long
lower than normal.
or service technician can tell you if the
outlet voltage is low. See page 7.
The Cook Power is not at the Check “Microwave cooking chart” on
recommended setting.
page 49.
There is not enough cooking
Allow for more time when cooking more
time for the amount of food
food at one time.
being cooked.
The Display
The oven door is not closed
Completely close oven door.
shows a time
completely.
counting down
but the oven is
You have set the controls as
Touch TIMER OFF to cancel the
not cooking
a minute timer.
Minute Timer.
You
do not hear
The command is not correct.
Reenter command.
the
Program-
ming Tone
The microwave
Probe is not pushed far
Insert at least
V3
of probe into
Dven turns off
enough into the food. the food.
too
soon or not
soon enough
Probe is not positioned
Position probe tip in the center of
when using the
correctly in the food. the food.
Temperature
When cooking roasts, you Allow roast to stand for a few minutes
Probe have not let roast stand after after cooking.
cooking.
Probe is not plugged in Plug probe tightly into its socket.
correctly.
Cook Power is not set Reset the Cook Power.
correctly.
Probe temperature is not set Reset the probe temperature.
correctly.
The Display
There has been a power
Reset the clock.
shows “888:88”
interruption.
54