Filter
Top Products
To replace:
1. Slide
a new charcoal filter into place.
The filter should rest at the angle shown.
2. Slide
the bottom of the vent cover into
place.
Push
the top until it snaps into
place.
Replace
the mounting screws.
After caring for filters:
l
Turn
the power back on at the main power
supply.
l
Do not operate
the hood without the filters
in place.
Replacing the cooktop and oven lights
Fire Hazard
Use only candelabra-base bulbs,
30-watt maximum.
Turn off power at main power supply
before replacing the light bulb.
Failure to follow the above could result
in fire or electrical shock.
The cooktop light
m
-
9
0
1. Turn
off power at the main power supply.
Bulb cover
mounting screws
2.
Remove
the bulb cover mounting screws.
3. Replace
bulb(s) with candelabra-base
30-watt bulb(s) available from your
authorized Roper service company
(Part No. 4158432).
38