Filter
Top Products
The oven light
Bulb holder
‘2
@&Ii&-
A vim
-
01
/
4
OI
1. Turn
off power at the main power
5.
supply.
6.
2.
Remove
the vent cover mounting
screws.
3. Tip
the cover forward, then
lift out
to
remove.
4.
Remove
bulb holder mounting screw.
7.
8.
Lift up
the bulb holder.
Replace
the bulb with a candelabra-
base 30-watt bulb available from your
authorized Roper service company
(Part No. 4158432).
Replace
the bulb holder and mounting
screw.
Slide
the top of the vent cover into place.
Push
the bottom until it snaps into place.
Replace
the mounting screws.
Turn
the
power back on at the main power supply.
39