Filter
Top Products
Cl
0
Touch the numbered pad “5.” 50,
the power level selected (5), will
appear in the Readout Display un-
til the
start/stop
pad is touched.
5. Touch the
start/stop
pad and vari-
able power defrosting begins.
The preselected defrost time reap-
pears in the Readout Display and
begins to count down to “0.”
During a Variable Power Defrost
operation, you may hear a sound from
the magnetron tube cycling on and off
and see the numbers in the Readout
Display flicker very slightly as the
tube cycles.
To Recall
It is possible to recall a timing,
temperature probe setting, the de-
layed start time or the time-of-day
whenever the oven is in use. Just
touch the desired function pad
and the preset timing, tem-
perature, delayed start time or
time-of-day will reappear in the
Time Readout Display for 3 sec-
onds. After 3 seconds, the Time
Readout Display will return to the
current timing.
To
recall a power level, first
touch the function pad (defrost,
cook
1,
cook 2 or probe] then the
power level
pad. The power level
for the function touched will ap-
pear in the Time Readout Display
for 3 seconds and then will return
to the current timing.
If a timing, temperature or power
level is recalled when the oven is
not in operation, the numbers will
remain in the Time Readout Dis-
play until you either program a
new entry, touch the
reset
pad to
cancel the function or touch the
start/stop
pad.
Programmed Oven Cooking
Feature
This feature lets you program the
oven to perform several operations in
sequence. Just set the oven one time
and it will automatically go from one
operation to the next until all opera-
tions are completed. The oven will
then signal the end of the program
and turn off.
For your convenience there are indi-
cator lights to show you which opera-
tions have been set. If +he
Basic Pro-
gram,
as described below. is set, all 4
indicator lights (defrost, cook 1. cook
2, timer) will turn on. As the oven per-
forms an operation, the correspond-
ing indicator light will turn off signal-
ing the completion of that operation.
The following chart is the
Basic Pro-
gram
with the variations available for
each of the operations. You can set
the oven to perform all 4 operations in
the Basic Program or any combination
of the variations as suggested in the
chart. Whatever program you select.
the oven will perform those opera-
tions in the sequence as shown in the
chart.
16