Filter
Top Products
Do not use the probe for a defrost
operation. Use the Temperature Pro-
be for microwave cooking
only.
It is
not designed for use in conventional
cooking. Store the probe outside the
oven when not in use.
The Automatic Plug In Turn Tray (a
microwave accessory) can not be
used when the Temperature Probe is
in use. Refer to the Use and Care
Booklet that came with the Turn Tray
for operating instructions.
Probe Placement:
The first %-inch of the tip end of the
probe contains a temperature sensing
device. To obtain accurate cooking
and heating results. it is essential that
the tip end be inserted into the center
of the food. Roasts and whole poultry
are the exception. For
roasts,
insert
probe into the center of the meat,
away from fat or bone. For
whole
poultry,
insert the tip end of the probe
into the thickest part of the thigh be-
,tween the thigh and breast area. Do
not let the tip end touch a bone.
To use the Temperature Probe:
1. Insert tip end of probe into food as
described above.
Be sure probe is securely inserted
into food. If probe should fall out
of food, it will sense the tempera-
ture of the air rather than the
food. This will cause food to over-
cook and possibly cause harm to
the oven.
2. Insert plug end of probe into the
upper receptacle (smaller of the
two receptacles) located on the
right oven wall. Probe
must
be in
place before oven will accept a
temperature entry.
3. Touch
probe
pad.
The
probe
indicator light will turn
on and the colon will blank in the
Readout Display.
4. Enter the desired temperature by
touching the numbered pads,
For example, if you wish to heat a
casserole to an internal tempera-
‘ture of 155”F., touch the numbered
pads 1, 5. 5, in sequence.
El o,Lg
Twice
155 or 155°F. will appear in the
Readout Display.
20