Filter
Top Products
2. Touch AUTO SEl.
(Optton: Sklp to step 6 If
you want to use the preset
cooking ttme and Cook
Power.)
The AUTO SET Indicator Light will
come on and the Display will show
2 mlnufes, 30 seconds (or the time
you have set as your favorite
cycle).
m
A
3. Touch a Number Pad for the
new cooklng ttme you want
from 1 to 9 minutes.
The Display will show what you
touched in even minutes. This
example shows 4 minutes.
. .
m
‘. -
4. Touch COOK POWER.
(Option: Sklp to Step 6 If
you want to cook at hlgh
The COCK POWER Indicator Light
will come on and the Display will
show “P-HI:’
power.)
5. Touch a Number Pad for the
Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50%
of full power.
6. Touch START.
d
count
own
The AUTO SET Indicator Light will
stay on while the oven is cooking
in the preprogrammed cycle. If
you selected a Cook Power other
than high, the Cook Power Indicator
Light will also come on.
The Display counts down the time to
show how much cooking time is left.
For 2 of every 10 seconds, the
Display will show the Cook Power
you selected, if you are using a
Cook Power other than high.
When Auto Set ends, “End” will show
on the Display and 4 beeps will
sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every
30 seconds (to remind you that food
is left in fhe oven) until the door
is opened or CANCEL is touched.
The Display will then show the time
of day.
NOTE: You can set COOK 1 or COOK 1 and 2 to follow Auto Set, (See page 13,
14 and 15 for
10
Instructtons).