Filter
Top Products
6. Touch START.
d
count
own
Changing cook power
The COOK 1 and COCK POWER
Indicator Lights will stay on to show
that the oven is cooking in the first
cycle at o Cook Power other than
high
The Display counts down the time to
show how much cooking time is left
In the first cycle
For 2 of every 10 seconds, the Display
will show the Cook Power you
selected
When the cooklng time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeplng by
opening the door or by fouchlng CAN-
CEL.) “End” will remain on the Display
and a beep will sound every 30
seconds (to remind you that food is
left In the oven] unfil door Is opened
or CANCEL Is touched. The Display
will then show the tlme of day.
The Cook Power can be changed any time before touching START or during the cycle
. Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power for the original time.
OR..
l
Touch COOK POWER lwlce if you want to change a lower Cook Power to HIGH.
l
Touch START.
Using AUTO SET
Auto Set provides fen presettimes. One to nine minutes at HIGH cook power can be set
by touching AUTO SET and the corresponding number pad 1-9. This provides a short-cut
method for sefflng commonly used cooking times.
The AUTO SET chart included with your microwave oven and the AUTO SET guide on
the inner door panel helps you cook various food items without having to look up the
cooklng times.
A preset time of 2 mlnufes, 30 seconds at HIGH cook power is avallable by touching
just the AUTO SET pad. The time may be changed to any time from O-99 minutes, O-99
seconds allowing you to store your favorite cooking time and Cook Power. See page 11
for Instructions.
DO THIS...
THIS HAPPENS...
1. Puf food In the oven and
close the door.
conflnued on next page
9