Filter
Top Products
Cooking in more than one cycle at one or more cook powers
For best results, some recipes call for one Cook Power for certain length of time, and another
Cook Power for another length of time. Your oven can be set to change from one to another
automatically.
DO THIS... THIS HAPPENS...
1. Put food in the oven and close
the door.
The COOK 1 lndrcator Light
WIII come on and the Dlsploy will
show four O’s
3. Touch Number Pads for the
cooking time you want in the
first cycle.
The Display will show the numbers
you touched in the order you
touched them. This example shows
3 minutes, 25 seconds
. .
Eia
‘. -
4. Touch COOK POWER. (If you
want the high Cook Power, skip
to step 6.)
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI”. This shows the oven is pre-
programmed to cook at full [HIGH)
power.
The Display will show what you
touched. This example shows you
m full power.
touched Number Pad 6 for 60% of
5. Touch a Number Pad for the
Cook Power you want in the first
cycle.
The COOK 2 Indicator Light will
come on and the Display will
show four 0’s.
m Elm m iii-~;jg~$;s
7. Touch Number Pads for the
cooking time you want in the
seconds.
secondcycle[
. .
m
‘. .
8. Touch COOK POWER. (If you
want the high Cook Power, skip
to step IO].
The COOK POWER Indicator Light
will come on and the Display
will show “P-HI”. This shows
the oven is preprogrammed to
cook at full (HIGH] power.
conttnued on next page ,3