Filter
Top Products
Using PAUSE with QUICK DEFROST
If the defrosting instructions call for stirring or turning of the food in the middle of defrost
cycle, program PAUSE after QUICK DEFROST. Half way through the defrost cycle a beep will
sound, “PAUS” will show on the Display and the oven will stop defrostlng. After stirring or
turning the food, touch START to continue the defrost cycle.
Standing time or cooking automaticaly after defrosting
For
best results, allow the food to stand for a while after defrosting. This helps equalize the
temperature of the food to provide more even defrosting.
When COOK 1 follows QUICK DEFROST, the oven automatically provides a standing time
equal to the time touched in for QUICK DEFROST. COOK 1 will begin after the automatic
standing time. There is no standing time between QUICK DEFROST and COOK 2 or QUICK
DEFROST and KEEP WARM.
For cooklng automatlcally after
defrosttng:
1. Touch QUICK DEFROST and desired time.
2. Touch COOK 1.
3. Touch numbers for desired cooking time.
4. Touch COOK POWER. (If you want to cook
at high power, skip to step 6.)
5. Touch a number for desired Cook Power.
6. Touch START.
For a different standlng time:
I. Touch QUICK DEFROST and desired time.
2. Touch COOK 2.
3. Touch numbers for desired standing time.
4. Touch COOK POWER.
5. Touch “0” for zero Cook Power.
6. Touch START
When QUICK DEFROST is over, the oven will shut off. If Cook 1 has not been programmed, 2
beeps will sound and the Display will count
down
the time for Cook 2 at zero Cook Power. If
Cook 1 has been programmed, the Display will count down and sound 2 beeps before
Cook 1 will start. “End” will show on the Display and 4 beeps will sound when the standing
time and cooking time is over.
About the “QUICK DEFROST” Cycle
The microwave oven automatically divides the time set for the QUICK DEFROST Cycle into
three equal parts:
First part. 80% of full Cook Power
Second part 50% of full Cook Power
Third part 20% of full Cook Power
This automatic step-down in Cook Power helps defrost food quickly and completely
Changing or adding defrost time
You can change the defrosting time any time before or after touching START.
. Touch QUICK DEFROST
l
Touch numbers for new time.
. Touch START.
Any new time setting made while QUICK DEFROST is operating will continue the
defrosting at only 20% of full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
l
Open the door.
l
Check the food with long-tined fork; if center area is hard frozen, set additional time.
Remember that standing time is necessary to complete defrosting.
l
Close the door and touch START To continue the cycle if no additional time is needed
OR...
l
Touch in new instructions for additional defrosting time.
12