Filter
Top Products
Using your microwave oven
Microwave oven controls
There are three parts in the control section:
-Digital Display/Clock, and Indicator Lights
- Command Pads
- Number Pads
Instructions for each control are covered on
the following pages. Read them carefully.
Command pads
mmm
See page 6 for
information on the
tone you hear when
touching any pad.
When you first plug in the oven, a tone sounds
and the Display will show 88:88. If after you
set the Clock (page 6) the Display again
shows all S’s, it means your electricity was
off for a while. Reset the Clock.
Digital display/clock and indicator lights
When you are not
using the micro-
wave oven, this is an
accurate digital
clock. When you are
using the micro-
wave oven, it dis-
plays time settings,
indicator lights and
shows what number
pads you touched.
Touch Command
Pads to tell the
microwave oven
what to do and in
what order. A few
examples:
-CLOCK SET tells
the oven you are
going to set the
clock.
- START tells the oven
to start.
Each Command Pad (except START, CANCEL, and
CLOCK SET) lights an Indicator Light when you
touch the Command Pad.
While the oven is running, an Indicator Light
(or lights) will be on to show what the oven
is doing.
Number pads
Once you’ve
touched a Corn
mand Pad to tel;
mmm
the oven what you
want it to do, you’ll
touch Number
Pads to tell it...
-attme
-a CookPower,
- a food
temperature.