Filter
Top Products
Changing the cooking time
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 will continue cooking for the new time.
lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS@ Cookbook tell you, by number, which Cook Power to
use. Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (lo%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20%of full power
1 = 10% of full power LOW
0 = TIMER [fan and light will be off)
DO THIS...
THIS HAPPENS...
1. Put food in the oven and close
the door.
The
COOK
1 lndicotor Light will
come on and the Display WIII show
four 0’s.
3. Touch Number Pads for the
cooklng ttme you want.
The Display will show the numbers
you touched in the order you
touched them. This example shows
7 minutes, 30 seconds.
. .
M!
‘. .
4. Touch COOK POWER.
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI”. This shows the oven is pre-
programmed to cook at full (HIGH]
power.
5. Touch a Number Pad for the
Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 5 for 50% of
full power.