Filter
Top Products
DO THIS...
THIS HAPPENS...
.‘.I
m
.
4. Touch PROBE TEMP.
The PROBE TEMP Indicator Light
will come on and the Display will
show ‘I?
The Display will show the numbers
you touched in the order you
5. Touch Number Pads for the
desired flnal temperatures
between 90°F and 200°F.
touched them. This example shows
a final cooked temperature of
about 140°F.
. .
ali
-. -
6. Touch COOK POWER.
(Option: Touch START if you
want to use high power.)
The COOK POWER Indicator Light
will come on and the Display will
show “P-HI:’ This shows the oven is
preprogrammed to cook at full
[HIGH] power.
m
0
7. Touch the Number Pad for
the Cook Power you want.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60% of
full power.
8. Touch START.
The PROBE TEMP and COOK POWER
Indicator Lights will stay on. The Dis-
play will show “CCCL” to show the
food is less than 90°F. As the food
cooks the Display will show the in-
ternal temperature of the food for
every 5°F increase.
For 2 of every 10 seconds, the Dis-
play will show the Cook Power you
selected, if you are using a Cook
Power other than high.
When the probe senses the tem-
perature you selected, the oven
shuts off. “End” will show on the
Display and 4 beeps will sound.
(You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on
the Display and a beep will
sound every 30 seconds (to re-
mind you that food is left in the
oven] until door is opened or
CANCEL is touched. The Display
will then show the time of day.
NOTE: “ERR” will be displayed after START is touched, if an incorrect temperature
has been selected (under 90°F and over 200°F).
16