The storage drawer
The storage drawer is for storing pots and pans.
The drawer can be removed to make it easier to
clean under the range and to check for installa-
tion of the anti-tip bracket. Use care when
handling the drawer.
Removing the storage drawer:
1. Empty drawer of any pots and pans before
removing drawer. Pull drawer straight out to
the first stop. Lift front and pull out to the
second stop.
2. Lift back slightly and slide drawer all the
way out.
Replacing the storage drawer:
1. Fit ends of drawer slide rails into the drawer
guides on both sides of opening.
2. Lift drawer front and push in until metal stops
on drawer slide rails clear white stops on
drawer guides. Lift drawer front again to clear
second stop and slide drawer closed.
The anti-tip bracket
The range will not tip during normal use. How-
ever, tipping can occur if excessive force or
weight is applied to the open door without the
anti-tip bracket properly secured.
To verify the anti-tip bracket is engaged:
l
Remove storage drawer.
l
Look to see if the anti-tip bracket is attached to
floor with screws.
l
Make sure the rear leveling legs are positioned
under bracket.
l
See Installation Instructions for further details,
18