Whirlpool RF396PXY Range User Manual


 
4. Push the Delay Start Time pad. The time of
day with the colon flashing will show in the
display and START TIME will light up.
5. Use the Hour and Minute pads to set the
desired start time. Push the “up” (A) or
“down” (V) pad(s) until the correct time shows
in the display.
This example shows a desired start time of
2 o’clock.
6. Push the Stop Time pad. The time of day with
the colon flashing will show in the display and
STOP TIME will light up.
7. Use the Hour and Minute pads to set the
desired stop time. Push the “up”
(A)
or
“down” (V) pad(s) until the correct time
shows in the display.
This example shows a desired stop time of
2:30. This provides a cook time of 30 min-
utes (the difference between the start and
stop times).
NOTE: If you do not set a stop time, the
colon will flash in the display and STOP and
COOK will flash alternately to remind you to
program a stop time or a cook time. (See
page 20 for instructions on how to set delay
start and stop automatically using Cook Time
and Start Time.)
8. Push the Start/Enter pad. DELAY and BAKE
will light up in the display to indicate that the
oven is programmed to start at a later time.
NOTE: The display will show “door” and a
tone will sound once a minute for 5 minutes
if the door is latched when you try to bake/
roast.
You can change the temperature or time
settings any time after pushing the Start/
Enter pad without pushing the Start/Enter
pad again.
23