Filter
Top Products
PROBLEM POSSIBLE CAUSE
SOLUTION
Cooking results
The range is not level.
are not what you
Level range. (See Installation Instruc-
expected
tions.)
The oven temperature seems too
Adjust the oven temperature control. (See
low or too high.
“Adjusting the oven temperature control”
on page 15.)
The oven was not preheated
Preheat oven when called for in recipe.
before baking.
The recipe has never been
tested or is not from a reliable
Use only t.ested recipes from a reliable
source.
source.
The pan used is not the type or Refer to a reliable cookbook for recom-
size recommended in the recipe.
mended pan type and size.
There is not proper air circulation
around pan when baking.
Allow 1 W to 2 inches (4-5 cm) of air space
on all sides of pan.
Cooking utensil does not fit the
surface unit being used.
Pan should be the same size or slightly
larger than surface unit being used.
The display
rhowr “PF”
‘Fl” or ‘F3”
shows In the
display
There has been a power failure.
Reset the clock (See page 12.)
Call for service. (See Step 3 on page 39.)
38