Filter
Top Products
TROUBLESHOOTING GUIDE
PROBLEM PROBABLE CAUSE CORRECTION
N
othing works
S
teamer module is not Have electrician verify that
connected to proper electrical proper voltage is being applied
circuit. to steamer module.
Fuse is blown or circuit Have electrician replace fuse or
b
reaker is tripped. reset circuit breaker.
No electricity supplied to Have electrician check house
steamer module. power supply.
Steamer module is in Unlock the control panel
Lock mode. (see page 8).
”Lo” appears in
Steamer module was started Follow instructions for Water
temperature display
with no water. Level Safety Feature on page 13.
Steamer basin water level Follow instructions for Water
is too low. Level Safety Feature on page 13.
16
WOLF TROUBLESHOOTING GUIDE