2-89
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
vlan (redirect virtual server submode)
vlan (redirect virtual server submode)
To define which source VLANs can be accessed on the redirect virtual server, use the vlan command in
the SLB redirect virtual server submode. To remove the VLAN, use the no form of this command.
vlan {vlan-number | all}
no vlan
Syntax Description
Defaults The default is all VLANs are accessed.
Command Modes SLB virtual server configuration submode
Command History
Examples This example shows how to specify a VLAN for redirect virtual server access:
Cat6k-2(config-slb-redirect-vs)# vlan 5
Related Commands show module csm sticky
show module csm vserver redirect
sticky
sticky-group (policy submode)
vlan-number The VLAN that the virtual server can access.
all Specifies that all VLANs are accessed by the virtual server.
Release Modification
CSM release 2.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
