2-28
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
map header
map header
To create a map group for specifying HTTP headers, and then enter the header map configuration
submode, use the map header command. To remove the HTTP header group from the configuration,
use the no form of this command.
map name header
no map name
Syntax Description
Defaults This command has no default settings.
Command Modes Module CSM configuration submode
Command History
Examples This example shows how to group HTTP headers and associate them with a content switching policy:
Cat6k-2(config-module-csm)# map upnready header
Cat6k-2(config-slb-map-header)# match protocol http header Accept header-value *jpeg*
Cat6k-2(config-slb-map-header)# match protocol http header User-Agent header-value *NT*
Cat6k-2(config-slb-map-header)# match protocol http header Host header-value
www.myhome.com
Cat6k-2(config-slb-map-header)# exit
Related Commands header-map (policy submode)
insert protocol http header (header map submode)
match protocol http header (header map submode)
show module csm map
name Map instance; the character string is from 1 to 15 characters.
Release Modification
CSM release 2.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
