2-71
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
script (probe submode)
script (probe submode)
To create a script for a probe, use the script command.
script script_name
Syntax Description
Defaults This command has no default settings.
Command Modes SLB probe script configuration submode
Command History
Usage Guidelines The script name should match a script in a configured script file.
Examples This example shows how to create a script probe:
Cat6k-2(config-module-csm)# ip slb script file tftp://192.168.10.102/csmScripts
Cat6k-2(config-probe-script)# script echoProbe.tcl
Cat6k-2(config-probe-script)# interval 10
Cat6k-2(config-probe-script)# retries 1
Cat6k-2(config-probe-script)# failed 30
Related Commands failed (probe submode)
interval (probe submode)
open (probe submode)
probe
receive (probe submode)
retries (probe submode)
script file
show module csm probe
script_name Specifies a probe script.
Release Modification
CSM release 3.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
