Garmin aera 795/796 Pilot’s Guide
190-01194-00 Rev. C
Appendix D
185
Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices Index
Connection Wire Color
Power Red
Power Ground/Data Ground Black
TX1 (Data Out) Blue
RX1 (Data In) Yellow
TX2 (Data Out) Orange
RX2 (Data In) Purple
Audio Right White
Audio Common Green
Audio Left Brown
aera 795/796 Aviation Bare Wire Connections
2)
From the Main Menu, touch Tools > Setup > Interface.
3)
Touch the 'Serial Data Format' datafield button. A vertical list is displayed.
4)
Touch ' Aviation In/NMEA & VHF Out' or ' TIS-A In/NMEA & VHF
Out' from the list. These comm modes send both NMEA data and VHF
frequency information.
The following features are now available on the radio:
•Remote frequency lists for departure, enroute, and arrival airports.
•Nearest VOR frequencies (SL30 only).
The aera 795/796 can also directly tune a standby frequency.
Selecting a standby comm frequency:
1)
From the Main Menu, touch WPT Info > Freq Tab
2)
Touch the desired frequency from the list. The frequency is now tuned in
standby.
Or:
a)
If the frequency has additional information (denoted with an *). Touch
the desired frequency from the list.
b)
Touch the 'Tune' Button.
