- 154 -
6.3.21 Bit Map Writable Character Command [ESC] XD, [ESC] XA
Function Writes writable characters and logos in the flash memory card, the ATA card, or flash
ROM on the CPU board.
Format For the flash memory card or flash ROM on the CPU board
[ESC] XD; (Sj, ) aa, b, ccc, ddd, eee, fff, ggg, h, iii ------ iii [LF] [NUL]
For ATA card:
[ESC] XA; j, aa, b(b), ccc, ddd, eee, fff, ggg, h, iii ------ iii [LF] [NUL]
Term Sj: Drive in which writable characters or logos are stored
(Omissible in the Bit Map Writable Character Command for the flash memory card
([ESC] XD). If omitted, flash ROM on the CPU board is selected.)
j: Drive
0: Flash ROM on the CPU board (It can be specified in [ESC] XD only.)
1: Slot 1 on the PCMCIA board (Option)
2: Slot 2 on the PCMCIA board (Option)
aa: Writable character set
• Flash memory card • ATA card
01 to 40 01 to 40
41 16 × 16 dots 41 16 × 16 dots
42 24 × 24 dots 42 24 × 24 dots
43 32 × 32 dots 43 32 × 32 dots
44 48 × 48 dots 44 48 × 48 dots
51 to 55 (2-byte code character)
• Flash ROM on the CPU board
01 to 40
41 16 × 16 dots
42 24 × 24 dots
43 32 × 32 dots
44 48 × 48 dots
51 2-byte code character
b(b): Writable character code
• Flash memory card
20H to FFH (Set in hex.)
40H to 7EH, 80H to FCH (When the writable character set is 41 to 44)
• ATA card
20H to FFH (Set in hex.)
40H to 7EH, 80H to FCH (When the writable character set is 41 to 44)
2020H to FFFFH (When the writable character set is 51 to 55)
• Flash ROM on the CPU board
20H to FFH (Set in hex.)
40H to 7EH, 80H to FCH (When the writable character set is 41 to 44)
2020H to FFFFH (When the writable character set is 51)
