- 53 -
j: Character attribution
B: Black character
W (aabb): Reverse character (The black background is evenly solid.)
aa: No. of dots from the character string to the end of the black
background in the horizontal direction
bb: No. of dots from the character string to the end of the black
background in the vertical direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
F (aabb): Boxed character
aa: No. of dots from the character string area to the box in the
horizontal direction
bb: No. of dots from the character string area to the box in the vertical
direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
C (aa): Stroked out character
aa: No. of dots from the character string area to the end of the stroke
aa: 01 to 99 (in units of dots)
R (aabb): Reverse character
(The black background is not evenly printed in black.)
aa: No. of dots from the character string to the end of the black
background in the horizontal direction
bb: No. of dots from the character string to the end of the black
background in the vertical direction
aa: 01 to 99 (in units of dots)
bb: 01 to 99 (in units of dots)
* Descriptions in parentheses are omissible.
(If omitted, it is character magnification (the larger one of horizontal or
vertical magnifications) × 6 dots.)
Jkkll: Bold character designation
(Omissible. If omitted, this process is not performed.)
kk: No. of horizontal shift dots
00 to 16 (in dots)
ll: No. of vertical shift dots
00 to 16 (in dots)
Mm: Type of the check digit to be attached
(Omissible. If omitted, the check digit is not drawn.)
m: Type of check digit
0: Modulus 10 (Draws data and check digit)
1: Modulus 43 (Draws data and check digit)
2: DBP Modulus 10 (Draws check digit only)
