- 36 -
6.3.2 Position Fine Adjust Command [ESC] AX
Function c Adjusts the feed value so that the label shifts forward or backward from the
automatically set first print start position.
d Adjusts the cut position so that the label will be cut at a position shifted forward or
backward from the automatically set cut position, or adjusts the stop position of the
strip issue so that the label shifts forward or backward from the automatically set stop
position of the strip issue.
e Adjusts the value for feeding the label back to the home position after cutting, or
adjusts the value for feeding the label back to the home position from the stop
position of the strip issue.
Format [ESC] AX; abbb, cddd, eff [LF] [NUL]
Term a: Indicates the direction, forward or backward, in which a fine adjustment is to be
made.
+: Backward
-: Forward
bbb: Feed length fine adjustment value
000 to 500 (in 0.1 mm units)
c: Indicates the direction, forward or backward, in which a cut position
(or stop position of the strip issue) fine adjustment is to be made.
+: Backward
-: Forward
ddd: Amount for finely adjusting the cut position (or stop position of the strip issue).
000 to 500 (in 0.1 mm units)
e: Indicates whether the back feed length is to be increased or decreased.
+: Increase
-: Decrease
ff: Amount for finely adjusting the back feed.
00 to 99 (in 0.1 mm units)
