Filter
Top Products
5
Important Safeguards (Continued)
Figure 1-8 – Air Pressure Label
The "Notice – Taping Head Latch" label, shown in
Figure 1-9, is attached to the top surface of the
upper, left belt guard at the front edge of the taping
head. The label reminds operators and service
personnel to keep latch down except to remove
taping head.
The "Notice – Raise and Lower Upper Drive
Assembly" label, shown in Figure 1-10 is attached
to the left column guard at the location of the
mechanical latch. The label provides instructions on
raising, latching/unlatching and lowering the upper
drive assembly.
The "Safety Instructions" and "Air Pressure"
labels, shown in Figure 1-8, reminds operator or
service personnel of the recommended air pressure
required and location of On/Off air valve.
Figure 1-10 – Upper Taping Latch LabelFigure 1-9 – Upper Taping Latch Label