Filter
Top Products
4
Important Safeguards (Continued)
Figure 1-6 – Stop and On/Off Labels
The "Caution – Pinch Point" label, shown in
Figure 1-5, is attached to the upper end of both
column guards. It warns the operator to keep hands
away from this area when machine is operating.
Figure 1-4 – Pinch Point Caution Label
Figure 1-7 – Safety Instructions Label
Figure 1-5 – Hands Caution Label
A red emergency stop switch is located on the top/
front of the upper drive assembly. The "Stop" label
shown in Figure 1-6, is located near the switch and
reminds operators and casual personnel of the
function of this switch. In addition, an "On/Off" label
is attached next to the electrical On/Off switch on the
side of the machine frame.
The "Caution – Pinch Point" label, shown in
Figure 1-4, is attached to the center plate at the exit
end of the machine bed. The label warns the
operator to keep hands out of this area when the
drive belts are running.
The "Safety Instructions" label, shown in
Figure 1-7, is attached to the top/front of the upper
drive assembly. The label provides convenient
safeguard instructions for the operator and service
personnel.