Filter
Top Products
FPC 8084 Users Manual
A.2.1 Standard CMOS Setup
“
Standard CMOS Setup
”
is used to record some ba sic hardware
configurations in the computer system and set the system clock and
error handling. If the motherboard is already installed in a working
system, there is no need to enter this option. However, the Standard
CMOS option has to be setup in any of the following situations: the
system hardware configurations are changed, the onboard battery
fails, and the configuration stored in the CMOS memory is lost or
damaged.
Phoenix – Award BIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Aug 7 2002 Ite m He lp
Time (hh:mm:ss) 13 : 9 : 11
f
IDE Primary Master None
Menu Level
f
f
IDE Primary Slave None Change the
f
IDE Sec ondary Ma ster None Day, month,
f
IDE Secondary Slave None Year and
Century
Drive A 1.44M, 3.5 in.
LCD Type T9 800x600 TFT
Screen Expansion Enable
TV Type NTS CDisplay
Type During Post VGA Default
Display Type After Post VGA Default
Halt on All, But keyboa rd
Base Memory 640K
Extended Memory 65535K
ÇÈ
ÆÅ
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1:
General Help
F5 : Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
At the bottom of the menu are the control keys for the use of this
menu. The <F1> key can be pressed in each item field to display the
relevant information for help. The memory display at the lower
right-hand side of the menu is read-only. It will adjust automatically
36