Filter
Top Products
FPC 8084 Users Manual
Date
The date format is <day>, <date> <month> <year>. Press <F3> to
show the calendar.
day
The day of week, from Sun to Sat, determined by the
BIOS, isr ead on ly
date
The date, from 1 to 31 (or the maximum allowed in the
M
onth), can key in the numerical / function key
month
The month, Jan through Dec.
year
The year, depends on the year of BIOS
Time
The time format is <hour> <minute> <second> accepting either function
key or numerical key. The time is calculated based on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Primary Master / Primary Slave / Secondary Master /
Secondary Slave
This category identifies the type of the channel that is installed in the
computer. There are 45 predefined types and 2 user definable types for
Enhanced IDE BIOS. Type 1 to Type 45 are predefined. Type User is
user-definable.
Press <PgUp>/<+> or <PgDn>/<
> to select a numbered hard disk type
or type the number and press <Enter>. Note that the specifications of
the drive in the system must match with the drive table. The hard disk
will not work properly if the improper information within this category is
entered. If the disk drive type does not match or is not listed, the Type
User is used to define the drive type manually.
If the Type User is selected, related information has to be entered.
Enter the information directly from the keyboard and press <Enter>.
This information should be provided in the documentation from the hard
disk vendor or the system manufacturer.
If the controller of HDD interface is ESDI, select
“
Type 1
”
. If
the controller of HDD interface is SCSI, select
“
None
”
.
If the controller of HDD interface is CD-ROM, select
“
None
”
.
CYLS.
num ber of
cylinders
LANDZONE
landing zone
HEADS
number of heads
SECTORS
number of
sectors
PRECOMP
write precom
MODE
HDD access
mode
If there is no hard disk drive installed, select NONE and press <Enter>.
38