Filter
Top Products
FPC 8084 Users Manual
A.2.5 Power Management Setup
The Power Management Setup is to save energy of the system
effectively. It will shut down the hard disk and turn OFF video display
after a period of inactivity.
Phoenix – Award BIOS CMOS Setup Utility
Power Management Setup
ACPI Function Disabled Item Help
Power Management Press Enter
PM Control by APM Yes Menu Leve l
f
Video Off Opti on Suspend -> Off
Video Off Method V/H SYNC+Blank
MODEM Use IRQ 3
Soft-Off by PWRBTN Instant-Off
Wa ke Up Events Press Enter
ÇÈ
ÆÅ
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1:
General Help
F5 : Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Function
This item is to enable/disable the Advanced Configuration and Power
Interface (ACPI).
The choice: Enabled, Disabled.
Power Management
This item is to select the Po wer Manage ment mode.
The choice: User Define, Min Saving, Max Saving.
PM Control by APM
W hen enabled, an Advanced Power Management device will be
activated to enhance the Max. Power Saving mode and stop the CPU
internal clock. If Advance Power Management (APM) is installed on the
system, selecting
Yes
gives better power savings. If the Max. Power
Saving is not enabled, this will be preset to
No
.
53