Filter
Top Products
FPC 8084 Users Manual
Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy Drive or not.
When enabled, the BIOS swaps floppy drive assignments so that Drive A
becomes Drive B, and Drive B becomes Drive A. By default, this field is
set to
Disabled
.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or 80
tracks. 360Kb type is 40 tracks while 720Kb, 1.2MB and 1.44MB are all
80 tracks. The default value is
Enabled
.
Enabled
Disabled
BIOS searches for flop py disk drive to determine if it is 40 or 80tra
cks. Note that BIOS can not tell from 720K, 1.2M or 1.44M drivetype
as they are all 80 tracks.
BIOS will not search for the type of floppy disk drive by tracknu
mber. There will be no warning mes sa g e disp l a yed if the driveinst
alled is 360K.
Boot Up NumLock Status
This option enables and disables the numberlock function of the keypad.
The default value is
On
.
On
Keypad functions confine with numbers
Off
Keypad functions convert to special functions (i.e., left/right arrow
keys)
Gate A20 Option
The default value is
Fast
.
Normal
The A20 s ig nal is controlle d by keyboard controller or chipsetha
rdwa re.
Fast
De fault: Fast. The A20 sign al is controlled by Port 92 or
chipset speci fi c method.
Typematic Rate Setting
This determines the typematic rate of the keyboard. The default value is
Disabled
.
Enabled
Enable typematic rate and typematic delay prog ramming
Disable typematic rate and typematic delay progr am ming. The
Disabled
system BIOS will use default value of t hese 2 items and the
default is cont rolled by keyboard.
43