Filter
Top Products
Door Disassembly Procedures
RS1200001 34 November 1996
Air Discharge Grille
1. Remove center vane. Note placement of vane,
curved/notches end first with curve up.
2. Remove 4 screws.
3. Pull grille assembly forward.
Refrigerator Door
Two people are required for door removal.
1. Remove grille.
2. Turn power switch off.
3. Remove glide pin screw (torx #15M) from
underside of top door hinge pin plate.
4. Loosen four 3/8" bolts enough to raise upper hinge
plate to clear door hinge pin.
5. Lift door off of center hinge plate.
6. Remove door.
Freezer Drawer and Basket
Pull forward and lift up.
Door Stops
1. Remove air discharge grille.
2. Remove two #15 torx screws.
Door Handles
1. Pry off screw trim. New trim will be required for
reassembly.
2. Remove 6 screws on freezer door and 9 on
refrigerator door, using a Phillips screwdriver.
Door Gaskets
1. Gently pull gasket away from door liner.
2. Reinstall by beginning in bottom corner, working
up. Align raised portion of gasket into liner track
and apply pressure.
Inner Door Liners and Outer Door Shells
Replace complete door assembly.
Refrigerator Door Switch
1. Remove air discharge grille
2. Remove two #1 point Phillips screws with an off set
ratchet tool.