Filter
Top Products
B136SPK1 ¼" Facia Front Enclosure Kit
November 1996 63 RS1200001
Bottom cabinet
extrusion
Side of
refrigerator
1/4" Panel
3/4" Panel
(Optional)
Panel
bracket
9. Slide panels into place on left and right side of
refrigerator. Verify that panel bracket is resting in
track on bottom cabinet extrusion. For smoother
installation, apply bar soap to cabinet extrusions
and panel brackets.
• Also, front panel bracket must fit in gap in front
side extrusion.
L-Bracket
Slide
panel in
here
Bottom cabinet
extrusion
10. Line up holes in right side L-bracket with holes from
7 screws removed in step 4. Attach L-bracket to
back of refrigerator using 7 screws removed in
step 4.
6. Mount bottom panel brackets using five, 3/16"
phillips screws.
• If base panel is not 1/4" thick, use plastic shims
provided with kit to bring base panel depth up to
1/4".
7. Mount bottom cabinet extrusion using five, 1/4" flat
head phillips screws.
8. While facing back of refrigerator, remove 7 screws
from right edge of refrigerator cabinet.
Remove
screws
Bottom cabinet
extrusion