Filter
Top Products
Installation
PARTS, TOOLS, MATERIALS
THE FOLLOWING PARTS ARE SUPPLIED WITH THE OVEN:
NOTE: Dependingon yourventilationrequirements,youmay notusealloftheseparts,
Backdraft damper / duct connector
(for roof-venting or wall-venting installation)D
NotActual Size ( 2 pieces must bet1
assembled as shown )
One power cord clamp and
One dark-colored mounting screw
(to hold the power cord)r"
Actual Size
Two self - tapping screws - Actual Size
(for attaching the damper duct connector)n
I One lock pin and one washer-Not Actual size
One power cord clamp bushing - Actual Sized
(for the cord hole ina metal upper cabinet)
Four 1/4" x 2" lag screws - Actual Sized
(for wall stud holes)
Four 1/4" x 3" toggle bolts - Actual SizeO
(for drywall holes)
_ }liii}llliiliililin niliilJillliilillliniillinlllnllnilllillnllllllllliliillllillit)
Two 1/4" x 2" or 3" bolts - Actual Sized
(for securing to the upper cabinet)
-))i)IIJIIIII}IilIilIIItlIIIIIIIIUIIIIIIIIIIIIIlIIUI)IIIlIII}_IIU)
Two washers - Actual Sizen
(for the two upper cabinet bolts)
Four spring toggle heads - Actual Sized
(forthe toggle bolts)
NOTE: You need to installat least 2 lag screws intoone 2" x 4" stud and four anchor bolts into the wall.
The mounting area must meet the 150 Ibs. weight requirement.
- 34 -