Filter
Top Products
Installation
STEP 3: PREPARE THE VENTING BLOWER
blower plate
mounting
st
ports
Figure 15
blower unit
exhaust port.,
_" blowerunit
mountingscrew
Figure 1613
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and two blower
plate screws. Remove the blower pJate from cabinet. See
Figure 17.
2. Carefully liftthe blower unit out of the microwave oven.
3. Rotate blower unit 90" so the exhaust ports face the front of
the cabinet. See Figure 18.
4. Place the blower unit back into the microwave oven.
5. Reattach blower plate to microwave oven. Attach with one
blower unit mounting screw and then two blower plate
mounting screws. See Figure 19.
blower
screws
blower unit
mounting screw
Figure 17
I screws
-blower
unit
Figure 18D
blower unit
mountingscrew
Figure 19
- 40 -