Filter
Top Products
Troubleshooting Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless
testing requires it.
RS2320006 Rev. 0 9
Problem Possible Cause Correction
Surface element does not heat
• Open element.....................................
• Loose wire connection or broken wire .
• Failed infinite switch............................
• Check element for continuity,
replace if failed.
• Verify all connections are clean
and tight, replace broken wiring.
• Check infinite switch, replace if
failed.
No bake operation
• Open bake element ............................
• Loose wire connection or broken wire .
• Check element for continuity,
replace if failed.
• Verify all connections are clean
and tight, replace broken wiring.
No broil operation
• Open broil element .............................
• Loose wire connection or broken wire .
• Check element for continuity,
replace if failed.
• Verify all connections are clean
and tight, replace broken wiring.
Oven light does not operate
• Failed oven lamp ................................
• Failed light switch ...............................
• Failed wiring .......................................
• Failed light socket...............................
• Check lamp and replace if
necessary.
• Check switch contacts.
• Check for broken and loose or
dirty connections.
• Check light socket for continuity.
Appliance not working
• Power outage ....................................
• Make sure appliance is plugged
in. Verify that circuit breaker is
not tripped.
• Replace household fuse but do
not change fuse capacity.
Frequent cycling of surface
element or warming zone
• Normal...............................................
• Element cycles to maintain
proper heat and to prevent
damage to smoothtop.
Oven not working
• Programming error.............................
• Shut off power to oven for five
minutes by switching off circuit
breaker. Reset circuit breaker
and try oven again.
Clock and timer not working
• Power outage......................................
• Make sure appliance is plugged
in. Verify that circuit breaker is
not tripped. Replace household
fuse but do not change fuse
capacity.
• See appropriate control appendix
and if continues, contact service
department.