Filter
Top Products
R9830350 Octopus User Guide (2001-08) 4-7
In it's default state, the
Administrator allows ALL users on ALL machines access under the Users priority.
To enable restrictions, one must first remove the default open access rule from the access list. This is
done by selecting a that particular (
ALL@ALL --> Users) line in the Access list and then subsequently
pressing the left pointing arrow button in the center of the dialog. The access rule will be removed from
the list.
It is now time to add the one user,
ROK, who uses the computer named KARCLT4H, into the list. The
access level is not important in this case, as
ROK will be the only user to be granted access to the
wallboard.
First, select the domain where this user/computer resides. In our example it is in the
BARCOEUROPE
domain. Below the selected domain, all of the computers in that domain will be listed:
Figure 34
select KARCLT4H
KARCLT4H, once selected, will list all users able to log into that computer in that domain. In this
example, we will scroll down to
ROK
Figure 35
user ROK selected with Users priority