Bertazzoni MAS304DFMXE Range User Manual


 
12
INSTALLINGTHEANTITIPStabilityDEVICE
Theantitipbracketshippedwiththerangemust
beproperlysecuredtotherearwallasshownin
thepicturebelow.
Theheightofthebracketfromthefloormustbe
determined after the range legs have been
adjusted to the desired height and
afterthe
rangehasbeenlevelled.
Measure the distance from the floor to the
bottom ofthe antitipbracketreceptacle onthe
backoftheappliance.
Position the two antitip brackets on thewall at
the desired height plus 1/8" (0.32 cm ). The
bracketsmustbeplacedat
2”5/16(6,0cm)from
theside ofthe range.The distancebetween the
twobracketis25”1/4(64,1cm).
Securethe bracketstothe wallwith appropriate
hardware.
Slidetherangeagainstthewalluntilthebrackets
are fully inserted into theirreceptacles on the
backoftherange.
INSTALLATIONREQUIREMENTS
ELECTRICAL
A properly grounded and horizontallymounted
electricalreceptacleTypeNEMA1450Rshould
beinstallednohigherthan3"(7.6cm)abovethe
floor, no less than 2” (5 cm) and no more than
11” (28cm) from theleft side(facingproduct);
refer to ELE CTRICAL CONNECTION section pag.
13.
Checkalllocalcoderequirements.
GAS
Anagencyapproved,properlysizedmanualshut
offvalveshouldbeinstallednohigherthan3"
(7.6 cm) above the floor and no less than 2” (5
cm)andnomorethan8”(20.3cm)fromtheright
side(facingproduct).
To connect gas
between shutoff valve and
regulator, use agency approved, properly sized
flexible or rigid pipe. Check all local code
requirements.