Filter
Top Products
26
SURFACEBURNEROPERATION
THERMOCOUPLESAFETYVALVE
Each surface burner of a Bertazzoni range is
equippedwithathermocouplesafetydevice.
The thermocouple opens the flow of gas to the
burner only when hot. Should the flame go off,
thethermo couple willimmediatelyclose thegas
flow to the burner eliminating any
risk to your
home.
Forfasteractivationofthethermocouple,always
light the burners on maximum power. This will
allow the thermocouple to reach the optimum
temperatureinthefastesttime.
ELECTRICIGNITION
To activate the electric ignition, simply turn the
control knob counter‐clockwise to maximum
power (
position). Press the knob to start the
flowofgasandtheignitionspark.Thespark will
releasedatthemetaltipofthewhiteceramicpin
locatedonthesideoftheburner.Oncetheflame
ison,releasethecontrolknobgently.
If the flame turns off, repeat the
above
procedure.
The dual power‐burner is composed by two
burners (inside and outside). Each burner is
activated by a separate control knob. The two
burners can be operated separately or together
for maximum power. To activate the power‐
burner,turnonthecentralburnerfirst,thenturn
onthe
externalring.
ATTENTION: do not ignite burners if the black
burner cap is not installed or not centred. The
flamewillbeirregular.
MANUALIGNITION
Manualignitionisalwayspossibleevenwhenthe
poweriscutofforintheeventofpowerfailure.
Turn the control knob counter‐clockwise
to the
MAXIMUM position. Light the flame with a
kitchenlighterorwithamatch.
TIPSFORUSINGBURNERSCORRECTLY
WARNING!
KEEPCHILDRENATASAFEDISTANCEFROMTHE
APPLIANCEDURINGOPERATION.
DONOTALLOWCHILDRENTOOPERATETHE
APPLIANCE.
1. Always check that the burner caps are
properly
installedbeforeoperation.
2. Verifythattheflameoftheworktopburners
iscompletelyblueandwithregularaspectas
shownbelow.
3. Alwaysadjusttheburnerflamesoitdoesnot
extendbeyondtheedgeofthepan.