Getting Started
English 11
5. Press START to accept a temperature change.
Reset the Factory Set-
tings
This feature is used to change all the “Select Functions” settings back to the origi-
nal factory settings (or defaults).
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until RESET DEFAULTS is displayed.
3. Press START. Display reads SELECT FUNCTIONS.
Set the Sabbath Feature About the Sabbath Feature
The Sabbath Feature is for religious faiths with “no work” requirements on the
Sabbath.
• The oven will bake for 73 hours before automatically turning off.
• While baking in Sabbath mode, the display will show SABBATH and the
BAKE icon will be displayed. The clock will be off and no temperature will
show in the display.
• During the Sabbath mode, only the OFF key will operate. Press OFF at any
time during the Sabbath mode to end the mode and turn off the oven.
• At the end of 73 hours, the oven will turn off automatically and the display will
show SABBATH END. Press Off to return to time of day.
Setting the Sabbath Feature for the Oven
1. Verify that the oven is turned off.
2. Access SELECT FUNCTIONS Menu.
3. Turn knob clockwise until SABBATH OPTION appears.
4. Press START. BAKE will show in display and temperature will flash.
5. Turn knob to set oven temperature.
6. Turn oven light on if desired (press LIGHT).
Note: The light cannot be changed after this point. It will stay on or off, as
selected, during the entire Sabbath mode.
7. Press START. Oven starts after 5 seconds.
The oven operates for 73 hours and then turns off automatically.
Change the Time Format The clock can be set to a 12 hour or 24 hour format. The default for clock format is
12 hour.
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until TIME FORMAT is displayed.
3. Press Start.
4. Turn knob to select 12 hour or 24 hour format.
5. Press Start to accept new selection.
Before Using the Appliance for the First Time
• Remove all packing materials and labels from range. Remove packing materi-
als from inside the oven and inside the drawer.
• While cool, wipe with a clean, damp sponge and dry.
• There may be a slight odor during first uses; this is normal and will disappear.
• Read and understand all safety precautions and Use and Care Manual infor-
mation prior to operating.