Filter
Top Products
13
BEFORE FIRST USE
ATTACHING THE LID
Attach the lid by placing it on the
processing bowl ensuring the
symbol
on the lid is aligned with the
symbol on
the bowl.
To lock the lid in place, hold the feed chute
and turn the lid counter clockwise so the
symbol on the lid aligns with the
symbol
on the handle.
Ensure the lid is positioned securely. Insert
the food pusher and measuring cup into
position in the food chute.
NOTE
Ensure the spindle, blade, disc and
disc holder are clean and free of food
residue before attaching the lid.
NOTE
The food processor will not operate
unless the processing bowl and lid
are positioned correctly and locked
into position.
OVERLOAD PROTECTION SYSTEM
The motor is protected from burning out
by an automatic cut-out switch. If the
Food Processor is overloaded or operated
continuously for too long, the motor may
overheat and stop. To operate the food
processor again, you must switch off, unplug
and allow to cool for approximately 30
minutes. Once the motor has fully cooled, it
is ready for use again.
Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. In this unlikely event of an
excessive load, do not operate the appliance
continuously with excessive load for more
than 1 minute.
If this occurs again, the processing bowl
may be overloaded, so remove some of the
food and process in smaller batches.
NOTE
The Food Processor is designed so
the motor will not operate without
the processing bowl and lid correctly
locked into position. In the event that
the food processor starts without the
lid correctly locked into position,
immediately disconnect at the power
outlet and return to your local Breville
Service Centre for examination.
ALIGN
LOCK