Breville BFP400 Food Processor User Manual


 
25
CARE & CLEANING
When you have finished processing ensure
the Speed Selection Dial is turned to the
Off position, the appliance is switched off
at the power outlet and the power cord is
unplugged. Then carefully remove the lid,
processing blade, dough blade, whisk or disc
holder and spindle, then the processing bowl.
MOTOR BASE
Wipe the motor base with a clean, damp
cloth after each use. Do not immerse the
motor base in water or any other liquid.
PROCESSING BOWL LID, FOOD
PUSHER, MEASURING CUP INSERT,
DISC HOLDER, SPINDLE, WHISK,
DOUGH BLADE AND SPATULA
Wash in warm to hot water using a mild
detergent. Rinse and dry thoroughly.
These parts may also be washed in the
dishwasher (top shelf only). Please note,
however, that the frequent washing of these
parts in the dishwasher may cause them to
become scratched or discoloured over time due
to hot water temperatures and harsh detergents.
Food can be dislodged from the internal shaft
of the dough blade by using a bottle brush.
NOTE
Do not use steel wool, scouring pads
or abrasive kitchen cleaners as they
will scratch these parts.
NOTE
Ensure the spindle and the hole in the
centre of the bowl’s lid are clean and
free of food residue before attaching
the lid for use or for storage.
PROCESSING BOWL, PROCESSING
BLADE AND DISCS
Wash in warm to hot water using a mild
detergent. To avoid accidental cuts, do not
leave processing blade or discs to soak in
sudsy water. Scrub stubborn food off blades
and discs using a soft brush. Food can be
dislodged from the internal shaft of the
processing blade by using a bottle brush.
Rinse and dry thoroughly.
NOTE
Do not use steel wool, scouring pads
or abrasive kitchen cleaners as they
will scratch these parts.
NOTE
Processing bowl, processing blade and
discs are not dishwasher safe. Do not
place them in the dishwasher.
FOOD STAINS AND ODOURS
Strong smelling foods such as garlic, onion,
fish and some vegetables such as carrots may
leave an odour or stain on the processing
bowl, lid, disc holder, spindle and food pusher.
To remove odours or stains, soak these parts
in 2 litres of water mixed with 100ml of
lemon juice or white vinegar for 30 minutes.
Then wash with a mild detergent and warm
water, rinse and dry thoroughly.