Breville BFP800XL Blender User Manual


 
13
ASSEMBLING YOUR BREVILLE SOUS CHEF ™
10. At the end of processing, always
wait until the blades or discs have
stopped spinning before unlocking
and removing the lid. To remove the
processing lid, ensure the POWER/OFF
button has been pressed, and the cord
is unplugged from the power outlet.
Holding the feed chute and pressing
down firmly at the same time, turn the
lid counter-clockwise so that the arrow
graphics are no longer aligned.
NOTE
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked; however, it is good
practice to manually switch off the
food processor using the POWER/OFF
button before removing the lid.
11. Remove the processing bowl (before
removing blade or discs) by turning it
counter-clockwise until the handle is in
line with the 'ALIGN HANDLE' graphic.
Lift the bowl off the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub on
the center of the disc and lifting the disc
up and away from the pin on the spindle.
NOTE
Reassemble the food processor by
locking the processing bowl into
position before attaching blade, disc
or lid.
NOTE
Care should be taken when removing
the food from the processing bowl by
ensuring the motor and processing
blade or disc has completely stopped
before disassembling. Ensure the
POWER/OFF button is pressed to
switch the motor off, and unplug the
cord from the power outlet before
removing the lid from the processing
bowl. The processing bowl should then
be unlocked from the motor body, then
the processing blade or disc should be
removed before attempting to remove
the processed food.
BFP800XL_IB_C12_FA.indd 13 15/03/12 1:32 PM