Filter
Top Products
14
ASSEMBLING YOUR BREVILLE SOUS CHEF™
OVERLOAD PROTECTION SYSTEM
If the motor overloads, the food processor
will go to 'Standby' mode and the
'OVERLOAD' icon in the LCD will start
to flash. The food processor can still be
switched off by pressing the POWER/OFF
button. To operate the food processor again,
allow the machine to cool for approximately
30 minutes.
Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. If this happens, do not process
for longer than 1 minute.
If the blades or discs should jam while
processing, ensure the POWER/OFF button
is pressed to switch the motor off and then
unplug the power cord from the power outlet.
Remove the processing lid and adjust any
food wedged between the blade and the
processing bowl or in the disc. Replace the lid
and proceed as normal. If this occurs again,
the processing bowl may be overloaded,
so remove some of the food and process in
smaller batches.
NOTE
The food processor is designed so
the motor will not operate without
the processing bowl and lid correctly
locked into position and the pusher
inserted into the feed chute. In the
event that the food processor starts
without the lid correctly locked into
position, immediately disconnect at
the power outlet and contact Breville
Customer Service.
BFP800XL_IB_C12_FA.indd 14 15/03/12 1:32 PM