Filter
Top Products
14
Step 7 - Using the Juice Extractor
As fruit and vegetables are processed, juice will
flow into the juice jug and the separated pulp will
accumulate in the pulp container.
The pulp container can be emptied during juicing by
turning the ikon™ Froojie™ Juice Fountain
®
‘Off’
at the control panel and then carefully removing the
pulp container. Replace the empty pulp container into
position before continuing to juice.
Do not allow the pulp container to overfill as this
may affect the operation of the appliance.
To minimise cleaning, line the pulp container
with a plastic freezer bag to collect the pulp.
Pulp can then be used in other dishes (see page
R12), or as compost for the garden or discarded
(see page 17).
To include the froth in with your juice, simply
remove the lid of the juice jug when pouring
juice into the glass.
Note
Step 8 - Using the Froojie™ Extractor
When using the Froojie™ Extractor Froojie™ will flow
into the juice jug. There will be no pulp extracted into
Pulp Container.
Some fruit Froojie™ may be left in the juice
collector. This is normal. The amount left over
will vary depending on ripeness and hardness of
fruit.
Note
WARNING: NEVER USE FINGERS,
HANDS OR OTHER UTENSILS TO PUSH
FOOD DOWN THE FEED CHUTE OR
TO CLEAR THE FEED CHUTE DURING
OPERATION. ALWAYS USE THE FOOD
PUSHER PROVIDED.
Operating your Breville ikon™ Froojie™ Juice Fountain
®
continued
Use the speed selector table located on the pulp
container for a quick and convenient juicing
reference.
Note
Step 5
Press the ‘On/Off’ switch on the control panel to ‘On’.
The juicer will start to operate at the selected speed.
The speed can be changed at any time during the
juicing process by adjusting the variable speed control
dial.
After 3 minutes, the LCD display will
automatically turn off if the ‘On/Off’ switch is not
turned ‘On’, or a speed is not selected.
Note
Step 6
With the motor running, place food into the feed chute
and use the food pusher to gently guide food down.
To extract the maximum amount of juice, always push
the food pusher down slowly.
The ikon™ Froojie™ Juice Fountain
®
will
automatically stop operating if the motor is
stalled for more than 10 seconds. This is a safety
feature. Either too much food is being processed
at one time or the pieces are not small enough.
Try trimming food, cutting food into smaller
pieces of even size and/or processing a smaller
amount per batch.
To continue juicing, reset the Juice Fountain Plus
by pressing the ‘On/Off’ switch on the control
panel to ‘Off’, switch off at power outlet and
remove power cord from power outlet, then clear
the feed chute, finally plug power cord back into
power point and switch on at power outlet. Turn
the appliance back on by pressing the ‘On/Off’
switch to ‘On’.
Note