Filter
Top Products
FOR USE WITH JUICE EXTRACTOR
Step 1
Place the motor base on a flat, dry surface such as
a bench top. Ensure that the motor base is switched
‘Off’ at the control panel, then switch the appliance off
at the power outlet and unplug the cord.
Step 2
Place the filter bowl surround on top of the motor
base.
Step 3
Align the arrows at the base of the juice disc with the
arrows on the motor drive coupling and push down
until it clicks into place. Ensure the juice disc is fitted
securely inside the filter bowl surround and onto the
motor base.
Step 4
Place the juicer cover over the filter bowl surround,
positioning the feed chute over the juice disc and
lower into position.
8
Assembling your Breville ikon™ Froojie™ Juice Fountain
®
Before first use
Before using your ikon™ Froojie™ Juice Fountain
®
for the first time, remove any packaging material and
promotional stickers and labels. Ensure the appliance is switched off at the power outlet and the power cord is
unplugged.
Wash the filter bowl surround, juice disc, juicer cover, Froojie™ Disc, Froojie™ insert, food pusher, pulp
container and juice jug and lid in warm, soapy water with a soft cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.